EXPANSION DEVICES
SPK-IN4 sw
Input line expansion module for AXEL control units, with the possibility of management of cable contacts for roller shutters.
- 4 input lines configurable in the same ways as the control panel lines.
- RS485 serial connection, up to 600 m away from the control panel.
- Board tampering protection buttons.
- Dimensions: 75×45 mm.
- AT-BOX compatible
SPK-IN8 sw
Input line expansion module for AXEL control units, with the possibility of management of cable contacts for roller shutters.
- 8 input lines configurable in the same ways as the control panel lines.
- 1 anti-tamper input.
- RS485 serial connection, up to 600 m away from the control panel.
- Board tampering protection buttons.
- Dimensions: 100×55 mm.
- Smart management of the supplementary power supply.
- AT-BOX compatible
OUT DOMO
OUTDOMO is a wireless module for activating automation functions for lights, gates, doors, irrigation, thermostats, etc.
- Compatible with the AXETA wireless system.
- Wireless relay powered directly at 80-240 Vac.
- Can drive loads up to 8 A 250 Vac / 5 A 30 Vdc.
- DIN rail compatible.
SPK-OUT4
Output line expansion module for AXEL control panels.
- 4 relay outputs with a capacity of 0.5 A.
- RS485 serial connection, up to 600 m away from the control panel.
- Board tampering protection buttons.
- Dimensions: 76×62 mm.
SPK-OUT8
Output line expansion module for AXEL control panels.
- 8 active Open Collector outputs.
- RS485 serial connection, up to 600 m away from the control panel.
- Protection buttons against card tampering.
- Prepared for connection to AXIREL relay output module.
- Dimensions: 75×45 mm.
- AT-BOX compatible
AXIREL
4 relay module for managing the active outputs of all devices in the AXEL control panels range.
- Flat cable input for quick connection.
- Connector for inserting an additional module to obtain 8 relay outputs.
- 4 output relays with 1 A terminal block switches.
- Terminal block connection of all 8 active outputs.
- AX-FL10 flat cable included.
- Dimensions: 70.5×40.7 mm.
- AT-BOX compatible
AX-FL10
Flat cable for connection between 10 pin connectors for all equipment of the AXEL line.
- Flat cable input for quick connection.
- Flat length: 20 cm.







