EXPANSION DEVICES

SPK-IN4 sw

Input line expansion module for AXEL control units, with the possibility of management of cable contacts for roller shutters.

  • 4 input lines configurable in the same ways as the control panel lines.
  • RS485 serial connection, up to 600 m away from the control panel.
  • Board tampering protection buttons.
  • Dimensions: 75×45 mm.
  • AT-BOX compatible

SPK-IN8 sw

Input line expansion module for AXEL control units, with the possibility of management of cable contacts for roller shutters.

  • 8 input lines configurable in the same ways as the control panel lines.
  • 1 anti-tamper input.
  • RS485 serial connection, up to 600 m away from the control panel.
  • Board tampering protection buttons.
  • Dimensions: 100×55 mm.
  • Smart management of the supplementary power supply.
  • AT-BOX compatible

OUT DOMO

OUTDOMO is a wireless module for activating automation functions for lights, gates, doors, irrigation, thermostats, etc.

  • Compatible with the AXETA wireless system.
  • Wireless relay powered directly at 80-240 Vac.
  • Can drive loads up to 8 A 250 Vac / 5 A 30 Vdc.
  • DIN rail compatible.

SPK-OUT4

Output line expansion module for AXEL control panels.

  • 4 relay outputs with a capacity of 0.5 A.
  • RS485 serial connection, up to 600 m away from the control panel.
  • Board tampering protection buttons.
  • Dimensions: 76×62 mm.

SPK-OUT8

Output line expansion module for AXEL control panels.

  • 8 active Open Collector outputs.
  • RS485 serial connection, up to 600 m away from the control panel.
  • Protection buttons against card tampering.
  • Prepared for connection to AXIREL relay output module.
  • Dimensions: 75×45 mm.
  • AT-BOX compatible

AXIREL

4 relay module for managing the active outputs of all devices in the AXEL control panels range.

  • Flat cable input for quick connection.
  • Connector for inserting an additional module to obtain 8 relay outputs.
  • 4 output relays with 1 A terminal block switches.
  • Terminal block connection of all 8 active outputs.
  • AX-FL10 flat cable included.
  • Dimensions: 70.5×40.7 mm.
  • AT-BOX compatible

AX-FL10

Flat cable for connection between 10 pin connectors for all equipment of the AXEL line.

  • Flat cable input for quick connection.
  • Flat length: 20 cm.

FILES AND INSTALLATION SHEETS

CONTACT US









    With reference to the processing of my personal data, for which consent is requested as explicated in the methods and purposes indicated in: